Seagate ST3390N Guía de instalación descargar pdf (Pagina 398)

100

101

A-16 Terminal configuration

Configuring an NT220 terminal

Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Configuring an NT220 terminal

Configuring an NT220

terminal

To configure an NT220 terminal, follow these steps.

Step Action

1 Power on the terminal.

2 Enter setup mode by pressing the SETUP key located in the

top row of function keys. If no key is marked SETUP, press the

third key from the left in the top row.

The General Set-Up screen is displayed with the current setup

values.

Note:

There may be minor differences between what you see in

this chapter and the contents of the setup screens on your

terminal. This is because of improvements made to the terminal

by the manufacturer. Follow the setup documented here as

closely as possible.

3 Change the values in each parameter field on each setup

screen as necessary, so that they match those shown in

“NT220 setup screens” on page A-17.

Use the following keys to view and change setup values:

Arrow keys Move from field to field.

Return Scroll through possible values or

cause the requested action to take

place (depends on the type of field).

To move to the next setup screen, select To Next Set-Up on any

other setup screen.

4 To save changes, return to the General Set-Up screen, move

the cursor to the Save Current Values field, and press Return.

5 To exit setup mode, press the SETUP key.

1 2 ... 393 394 395 396 397 398 399 400 401 402 403 ... 467 468

Comentarios a estos manuales

Sin comentarios

Seagate ST3390N Guía de instalación Pagina 398

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Seagate ST3390N