Seagate ST3390N Guía de instalación descargar pdf (Pagina 198)

12-16 Configuring the Meridian 1

Establishing the AML using an MSDL card

Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

DES aaa...a AML port designation. This can

be any alphanumeric string up

to 16 characters: 0–9 and A–Z

(uppercase only) are allowed.

Characters * and # are not

allowed.

BPS 9600 Baud rate

PARM (R232 DCE) (MSDL only) Interface and

transmission mode

CLOK7 EXT Internal or external clock.

Source of primary clock is either

internal or external. (ESDI only)

IADR (3) Individual Address for the

datalink HDLC protocol. You

must coordinate the IADR and

RADR prompts with the far-end.

If IADR is defined as 3, then

RADR must be 1. Default is 1,

prior to Release 18.

RADR (1) Remote address for the datalink

level HDLC protocol. The IADR

and RADR prompts must be

coordinated with the far-end. If

IADR is defined as 3, then

RADR must be 1. Default is 3,

prior to Release 18.

LCTL YES Modify link control parameters.

T1 10 Timer of retransmission range

in units of 0.5 s.

T2 10 Maximum time allowed without

a frame being exchanged

T3 40 Timer for initial link setup in

units of 0.5 s.

N1 (128) Maximum number of octets

(8-bit bytes) per HDLC

information frame. Allowed

values are 32, 64, (128).

N2 (8) Maximum number of

retransmissions in steps of 1

K (7) Maximum number of

outstanding frames

LTHR NO Default link performance

thresholds (ESDI only)

Prompts Responses Description

1 2 ... 193 194 195 196 197 198 199 200 201 202 203 ... 467 468

Comentarios a estos manuales

Sin comentarios