Seagate ST3390N Guía de instalación descargar pdf (Pagina 228)

100

101

13-8 Starting up and configuring Meridian Mail

Configuring Meridian Mail

Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Configuring Meridian Mail

Introduction

To configure Meridian Mail, use the following steps when the

Logon screen appears on the administration terminal.

Note: You may need System Administration Tools

(NTP 555-7001-305) and the System Administration Guide

(NTP 555-7001-301) to complete this procedure.

Step Action

1 Log on to Meridian Mail using the default system user ID and

password.

Note:

Meridian Mail 13 requires both a user ID and a

password. See

What’s New in Meridian Mail 13

(PO904567) for

more information.

2 Change the administration password from the installation

default.

3 Verify that remote login works by setting the A/B box switch to

Remote and dialing in.

Note:

If you are using a high-speed modem (that is, one over

2400 bps such as the Ventel 9600 Plus II or the US Robotics

14.4), and the connection fails, wait 15 seconds before you

attempt to reconnect.

4 Reset the A/B switch to “Local.”

5 Make sure the customer number is correct.

The system is delivered with the customer number already

configured. Check the General Options function under the

General Administration menu item.

6 Check that the voice service DNs (Voice Messaging, Express

Messaging, and so on) are correctly set up. Use the Voice

System Administration menu, Voice Service DN table.

7 If you have made any changes to the system, reboot the

system as described below:

a. Power down the system for 10 seconds, then power back

on.

b. Check the system by adding some mailboxes and using

some Meridian Mail features.

8 Log out.

1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 467 468

Comentarios a estos manuales

Sin comentarios

Seagate ST3390N Guía de instalación Pagina 228

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Seagate ST3390N