Seagate ST31230N/ND Guía de instalación descargar pdf (Pagina 99)

Cabling, installing, and configuring the peripheral devices 8-27

Racal modem

Standard 1.0 Option 11 EC Installation and Maintenance Guide November 1999

Racal modem

Configuration

To configure the Racal ALM 3223 modem, use the

administration terminal set up for either 2400 bps or 9600 bps

operation.

Note: There are no DIP switches for this modem.

Refer to the procedure below if you are configuring the Racal

as a local modem operating at either 2400 bps or 9600 bps.

Refer to the next procedure if you are configuring the Racal

modem as a remote-access modem operating at either 2400

bps or 9600 bps.

Configuring the Racal

ALM 3223 modem as a

local modem

To configure the Racal modem as a local modem, follow

these steps.

Step Action

1 Connect the modem to the administration terminal.

2 Enter the following commands from the terminal:

AT&F <Return> (response is OK)

AT&Y0 <Return> (response is OK)

AT\Q0, 0 <Return> (response is OK)

AT\M1 <Return> (response is OK)

AT\N0 <Return> (response is OK)

AT&D0 <Return> (response is OK)

AT&S2 <Return> (response is OK)

ATS61=3 <Return> (response is OK)

ATS43=3 <Return> (response is OK)

ATS44=7 <Return> (response is OK)

ATQ1 <Return> (no response)

ATE0 <Return> (no response)

AT&W0 <Return> (no response)

AT&W1 <Return> (no response)

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 271 272

Sin comentarios

Seagate ST31230N/ND Guía de instalación Pagina 99