
Starting up and configuring Meridian Mail 13-3
Configuring Meridian Mail on the EC 11
Standard 1.0 Option 11 EC Installation and Maintenance Guide November 1999
Configuring Meridian Mail on the EC 11
The following procedure shows an installation for a 32-port
EC 11 system connected to an Option 11 switch that does
not have an expansion cabinet. In this example, we use card
slots 2 and 6 for the MGate cards in the Option 11 switch,
and put 24 channels on node 1, and 8 channels on node 2 in
the EC 11.
At this point, you have installed all necessary hardware in the
Meridian Mail Option 11 switch and the EC 11. The virtual
ACD agents are in place for the Meridian Mail voice
channels.
Installing and
configuring Meridian
Mail
To install and configure Meridian Mail, follow these steps.
Step Action
1 Start the system from the install tape.
Result: Once loaded, the System Installation and
Modification Menu is displayed.
Note: This menu is the same for all platforms.
Comentarios a estos manuales