Seagate ST31230N/ND Guía de instalación descargar pdf (Pagina 84)

8-12 Cabling, installing, and configuring the peripheral devices

Installing and configuring the LA75 Plus or LA30N Companion printer

Standard 1.0 Option 11 EC Installation and Maintenance Guide November 1999

LA75 Plus Companion

or LA30

printer

connection to

administration

terminal

Configuring an LA75

Plus Companion

printer

After you have installed the printer, you must configure it.

To configure an LA75 Plus Companion printer, follow these

steps.

VT520

terminal

BC16E-10 cable

LA75/LA30

Step Action

1 Ensure that the printer is turned off.

2 a. Press and hold the Set-up button on the

front control panel of the printer, and, at the

same time, power on the printer.

b. Release the Set-up button one or two

seconds after powering on.

Result: The printer automatically prints a list of the

default settings. When the list is complete, the printer

goes back to the beginning of the list, reprints the first

setting, and stops (that is, it goes back to “Generic 1”

and stops).

3 To change the value of the current setting, press the

left arrow on the control panel.

Result: The printer prints the current feature number

again with the new setting. See “LA75 printer

required settings” on page 8-13 in this section for the

required value.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 271 272

Sin comentarios

Seagate ST31230N/ND Guía de instalación Pagina 84