Seagate ST118273WC Guía de usuario descargar pdf (Pagina 81)

Additional References

HP-UX version 11.00.01 Configuring Asynchronous Serial Interfaces 7-9

■ If modems connect to each other, but no data appears, turn off all compression,

reliability, MNP, PEP, LAP, and other advanced features. Set the modem as

simply as possible. Once working, add the advanced features.

■ Do not use CCITT control signals on either modem or system. This does not

affect the modem use of CCITT modulation or compression standards such as

V.22, V.32, V.22bis, V.32bis, V34, V.42, or V.42bis.

■ Save modem settings in nonvolatile modem memory so modem retains the

setup after power loss. (Use AT&W on Hayes modems.)

■ Record modem settings on a worksheet for future reference.

See the mksf(1M), modem(7), and termio(7) man pages for bit values and use.

Additional References

In addition to the material furnished in the manual, you can consult the following

references:

■ PCI card installation and operation documentation

■ HP-UX Operating System: Fault Tolerant System Administration (R1004H)

■ the mksf(1M), insf(1M), stty(1M), modem(7), and termiox(7) man pages

■ DTC Device File Access Utilities and Telnet Port Identification (B1030-90002)

1 2 ... 76 77 78 79 80 81 82 83 84 85 86

Sin comentarios

Seagate ST118273WC Guía de usuario Pagina 81