Seagate ST118273WC Guía de usuario descargar pdf (Pagina 19)

Peripherals and Fault Tolerant Hardware

HP-UX version 11.00.01 Getting Started 1-3

Differences from Hewlett-Packard Systems

Stratus and Hewlett-Packard systems do not support the same set of peripheral

devices.

Continuum systems do not support the following types of peripherals and

supporting hardware:

■ floppy disk drives

■ disk arrays

■ magneto-optical devices

■ printers and plotters (except through the optional asynchronous interface)

■ graphics cards

■ ISA cards

Continuum systems do support:

■ A CD-ROM drive on the external SCSI bus. You cannot configure in a

CD-ROM drive in place of one of the base unit disk drives.

■ Adding most peripherals without shutting down and rebooting the system. If

you are familiar with using the HP-UX operating system on a

non-fault-tolerant system, you should make a special effort to familiarize

yourself with these differences.

Continuum systems differ in the way they support:

■ Uninterruptible Power Supply (UPS)

■ Modems. See Chapter 3, “Configuring Serial Ports for Terminals and

Modems,” for more information.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 85 86

Sin comentarios

Seagate ST118273WC Guía de usuario Pagina 19