Seagate ST118273WC Guía de usuario descargar pdf (Pagina 39)

Downloading Firmware

HP-UX version 11.00.01 Configuring Interface Cards 2-5

The fields in the /etc/stratus/personality.conf file have the same

purpose and meaning as the fields in the /etc/stratus/download.conf file.

New cards with a Modelx entry configured in the

/etc/stratus/download.conf can be added any time. Whenever a new card

is added, downloadd:

■ identifies the new device

■ determines if the model for the device is present in the download.conf file

Modelx field

■ downloads the firmware as specified in the command field when INI is in the

event field for the model in the download.conf file

To add a new device when the model of the device is not listed in the Modelx field:

1. Add an entry for the new model in the download.conf file (be sure to

include the new specification for the Modelx field).

2. Issue the following command to reread the configuration file:

downloadd -rescan

Whenever a new type of card is added and a new entry is added in the Modelx

field, this command line initiates the downloadd daemon. downloadd

identifies the new cards and downloads firmware as specified in the command

field when INI is in the event field for the model in the download.conf file.

The downloadd command options include:

-kill Kill the running downloadd daemon.

-rescan Reread the /etc/stratus/download.conf configuration file

-h Help messages

If you want to burn different firmware to a board in a particular slot, you need to

configure download.conf and personality.conf.

For example, to burn new firmware to the K118 device in a specific slot, you must

add entries to download.conf and personality.conf.

In download.conf, add the following entries for the K118 device:

F * - k11800 ALD INI "kdload -d /dev/diag/mux$INST -f $FW_PATH"

C * - k11800 - ENA "kdload -d /dev/diag/mux$INST -f $FW_PATH"

C * - k11800 - ACT "kdload -d /dev/diag/mux$INST -f $FW_PATH"

In personality.conf, add the following entries for the particular firmware and

slot desired for the K118 device:

k11800 ALD 11/10/12 /etc/stratus/prom_code/ioa18_async.pm

k11800 ALD 11/10/16 /etc/stratus/prom_code/ioa18_async.pm

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 85 86

Sin comentarios

Seagate ST118273WC Guía de usuario Pagina 39