Seagate ST118273WC Guía de usuario descargar pdf (Pagina 30)

Using ftsmaint to Administer System Hardware

1-14 Peripherals Configuration (R1001H) HP-UX version 11.00.01

Using ftsmaint to Administer System

Hardware

The ftsmaint command is the primary utility for managing Continuum system

hardware components. The ftsmaint command provides a variety of services

such as the following:

■ displays hardware configuration and status information (similar to ioscan)

■ enables or disables hardware devices

■ synchronizes paired components (for example, duplexing/unduplexing

CPU/memory boards or switching online/standby console controllers)

■ burns board-resident PROM code

■ configures mean-time-between-failure (MTBF) settings

To view a list of command options, enter

ftsmaint -h

See the ftsmaint(1M) man page for a description of all options. See the

“Administering Fault Tolerant Hardware” chapter in the HP-UX Operating System:

Fault Tolerant System Administration (R1004H) for examples of using ftsmaint to

accomplish various administrative tasks.

NOTE

Use the addhardware command to add new peripheral components to

your Continuum system; use ftsmaint to remove or replace peripheral

components.

Displaying Hardware Information

The ls option displays information about the Continuum system configuration,

including instance number, device/interface driver, software state, and hardware

type. To view configuration and status information, enter one of the following:

ftsmaint ls [short listing of all components]

ftsmaint ls -l [long listing of all components]

ftsmaint ls hw_path [long listing for hw_path]

hw_path is the hardware path for a specific component. The fields in a long listing

vary according to the type of component. Figure 1-6 shows a sample short listing

of all components.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 85 86

Sin comentarios

Seagate ST118273WC Guía de usuario Pagina 30