Seagate ST39175LW Guía de usuario Pagina 36

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 104
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 35
General Procedure
26 NetBackup ServerFree Agent System Administrators Guide
General Procedure
The following is an overview of the hardware configuration procedure for a NetBackup
Media Server. Some of these steps may be optional depending on your hardware
configuration.
Familiarity with the hardware and various vendor configuration tools will help you
accomplish these steps.
See Example Fibre Channel Configuration with Chaparral Router on page 32 for a more
detailed example of configuring hardware on a Solaris host.
Determine the physical location of each drive within the robot.
Note This task may not be needed if you are able to use device discovery (a part of the
NetBackup Device Configuration wizard).
This is usually shown on the connectors to the drives or in the vendors
documentation. The robot and slot layout appendix in the Media Manager System
Administrators Guide - UNIX shows the layout for many robots. For the robot types
supported by NetBackup 4.0V ServerFree Agent, refer to Chapter 2 of the NetBackup
4.0V Release Notes.
Make all drive and robot hardware connections.
Install any SAN hardware, such as bridges or routers, switches, and hubs.
Determine the SCSI-ID-to-fibre-channel-lun mapping for your tape devices (if fibre is
part of your configuration and you are using a SCSI-to-fibre bridge or router).
Hard-wired SCSI IDs are converted to fibre channel luns. Understanding which luns
map to which physical SCSI IDs will ensure correct drive assignments. See Fibre
Channel Mapping Examples on page 30.
Record the physical configuration.
It is helpful to record your hardware information. Record the adapter, SCSI addresses,
and fibre channel luns to which you connected each drive. It is also useful to record
the version levels of firmware and drivers. See Example Configuration Matrix on
page 29 and Fibre Channel Mapping Examples on page 30.
Install and configure any appropriate drivers.
See your vendor documentation for instructions.
NetBackup 4.0V ServerFree Agent System Administrator's Guide for Solaris
NetBackup 4.0V ServerFree Agent System Administrator's Guide for Solaris
TechNote 233390
Vista de pagina 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 103 104

Comentarios a estos manuales

Sin comentarios