
KZPSA PCI-to-SCSI Storage Adapter
6–6 EK–KZPSA–UG. B01
Figure 6–3 SCSI Options
Use the arrow keys to select the following:
• List existing SCSI devices
• Configure device specific parameters
• Reset the SCSI bus
These functions are described in detail in Chapter 2.
Use the spacebar to :
• Change the SCSI ID (This increments the SCSI ID up to 15 and then goes
back to 0)
• Toggle Fast Mode and Reset-on-Boot from Enabled to Disabled
• Toggle Termpower from Supplied to Not Supplied
Select Save and Exit to save parameter modifications.
Select Use Default Setting to return to the factory default settings.
Comentarios a estos manuales