Seagate ST12550WD Guía de usuario descargar pdf (Pagina 30)

Chapter 5. Windows NT AXP Systems

EK–KZPSA–UG. B01 5–3

6. Note that the third line in the list contains a Vendor Id field of “1011” and a

device type of “8”. These two values uniquely identify the KZPSA. Search

your display for a line (or lines if you installed more than one KZPSA)

containing these exact values. If there is no entry that corresponds to the

KZPSA, your adapter may not be correctly installed. Power off your system

and repeat the installation process in Chapter 3 of this guide, then this pro-

cedure. If successful, continue with the next step. Otherwise, refer to the

troubleshooting information in Chapter 7.

7. When you have found all the installed KZPSA adapters listed in step 5,

continue to press Enter until you have returned to the Supplementary Menu,

then select the Boot Menu item to return to that menu.

8. If you need to modify the parameters of the adapter for your installation

(see Chapter 2 for a discussion of adapter parameters), select Run a Pro-

gram from the Boot Menu and follow the steps in Chapter 6, “KZPSA

Adapter Utilities”. Continue with Section 5.3 below to install the KZPSA

device driver.

5.3 Installing the Device Driver

This procedure describes how to install the device driver after the Windows NT

operating system is installed. Proceed as follow:

1. Log into the Windows NT system with Administrator privileges.

2. Click on the Windows NT Setup icon in the main program group.

3. Select the Options menu in the Windows NT Setup window.

4. Select the Add/Remove SCSI Adapter function.

5. Click on the Add button in the dialog box.

6. A warning message is displayed; click on the OK button in the Confirm

box.

7. From the list of adapters on the display, select Other. You may have to

click on the list to reveal all of the options including the "Other" option.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 66 67

Sin comentarios

Seagate ST12550WD Guía de usuario Pagina 30