Seagate ST200FP0021 Especificaciones Pagina 39

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 86
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 38
HDD Setup Continued
Auto Overwrite: If activated, this selection will overwrite the recorded video/audio from HDD#1
when the Alarm/Normal Record disk drive capacity is full. If Auto Overwrite is disabled & the
Alarm/Normal Record disk drive capacity is full, the system will not overwrite the recorded
video/audio, and will not record Alarm/Normal video/audio until the Alarm Reset button is pressed.
Use +/- to check/uncheck this item. By default, this setting is checked.
• HDD Full Action: This option defines what action the DVR will take when the Alarm/Normal Record
disk drive capacity is full. Press +/- to check/uncheck this item. By default, this setting is checked.
• Duration: This option defines the response duration (in seconds) of the Alarm Out relay and
Buzzer activation when the corresponding partition is filled up. Use the +/- buttons to adjust the
value (3 seconds - 60 minutes, discrete, ‘-‘ for ‘Forever’). By default, this setting is checked.
Alarm Out: This option defines which Alarm Output will be triggered when the corresponding
partition, Alarm Record or Normal Record, is full. Use the +/- buttons to select none (N/A) or one
of the Alarm Outputs (1-4).
• Buzzer: This option defines whether or not to activate the internal DVR Buzzer when the
corresponding partition, Alarm Record or Normal Record, is full. Press Enter or +/- to
check/uncheck this item. By default, this setting is checked.
• Log: This defines whether or not system events are logged. Click Enter or +/- to check/uncheck
this option. By default, this setting is checked.
• E-mail: This option defines whether an event e-mail is sent to a remote email address or not.
The e-mail will be sent to the predefined recipients the moment when the event is triggered.
Use the Enter button or +/- to check/uncheck this option. By default, this setting is not checked.
39
Vista de pagina 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 85 86

Comentarios a estos manuales

Sin comentarios