Seagate ST200FP0021 Especificaciones descargar pdf (Pagina 37)

Scheduled Record Setup Continued

In a time segment, if both Alarm and Motion are set to “Off”, the audio/video will record normally

unless video loss is detected. General operations for Scheduled Record: Easy Setup menu are

defined below. This menu allows the administrator to use a simple and easier way to set the

scheduled recording of the system. In Easy Setup, there are Six Selectable Recording Modes:

Alarm+Motion+Normal, Alarm+Motion, Alarm, Motion, Normal, and No Record. Video & Audio are all

recorded for the selectable Recording Modes except “No Record”. After the Easy Setup, the time

segments for each day in Scheduled Record will be changed accordingly.

• ▲▼ : (Mouse: Left click) Use these buttons to select the desired menu or area.

• Copy: Use this button to copy the settings of the current camera to all the following cameras.

• Numeric 1-6: (Mouse: Left click) Use these buttons to select the active Recording Mode.

Press Enter on the recording mode to activate it. The Recording Modes are :

“1”Alarm+Motion+Normal, “2” – Alarm+Motion, “3” – Alarm, “4” – Motion, “5” – Normal, “6” – No

Record, and Others (not selectable).

• +/- : (Mouse: Left click and drag) Use these buttons to set the focus interval (one grid for one

hour) upwardly/downwardly to the Active Recording Mode. The user may also press ENTER to

set the focus interval to the Active Recording Mode.

• Esc: (Mouse: Right Click) Use this button to escape from the current screen, and return to the

previous menu. The time segments for each weekday in Scheduled Record will be updated

accordingly.

◄►

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 85 86

Sin comentarios

Seagate ST200FP0021 Especificaciones Pagina 37