Seagate ST200FP0021 Especificaciones descargar pdf (Pagina 11)

HDD Installation

1. To install a hard drive, power off the DVR & use a Phillips screwdriver to remove the cover.

2. Remove the brackets you are going to use from the DVR using a Phillips screwdriver.

3. Secure the hard drive to the brackets that you removed using the provided screws and a

Phillips screwdriver.

4. Place the hard drive you connected to the brackets back into the DVR, and secure it with a

Phillips screwdriver.

5. Plug in the SATA cable(s) and power cable(s) to each HDD.

Each of the hard drives must be formatted before it can be used to record video/audio.

Note: If you install a DVD burner (not included) it must be connected to SATA #6 connector on the

16 Channel DVR, or the SATA #2 connector on the 4 or 8 Channel DVR.

Refer to page 39 for instructions on how to format the HDDs.

16 Channel Model

8 Channel Model

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 85 86

Sin comentarios

Seagate ST200FP0021 Especificaciones Pagina 11