Seagate ST200FP0021 Especificaciones descargar pdf (Pagina 34)

Alarm Setup Continued

• Focus Camera: This option is used to call up the corresponding camera on the video outputs.

• Duration: This option defines the response duration (in seconds) of the Alarm Out relay & Buzzer

when an alarm input is triggered. The Alarm Out relay and the Buzzer will be reset immediately

once the alarm input returns to normal. Use the +/- buttons to adjust the value (3 seconds - 60

minutes, discrete, or choose ‘-‘ for continuous activation).

• Goto Preset: This option defines the preset position the current camera (if a PTZ camera) will go

to if an alarm input is triggered on that camera.

• Pre-record: This defines how long video will be saved when an alarm input is triggered on the

corresponding camera. Use the +/- buttons to adjust the value (0-10 seconds, discrete). The

actual pre-recorded time may be shorter than the value set if the size of the pre-recorded file

exceeds the designated buffering size of the DVR’s memory.

• Post-record: This defines how long video will be saved if after an alarm input is detected on the

corresponding camera. Use the +/- buttons to adjust the value.

• Alarm Out: This option defines which Alarm Output will be triggered when the Alarm Input on the

corresponding camera is triggered. Use the +/- buttons to select none (N/A) or one of the Alarm

Outputs (1-4).

• Buzzer: This option defines whether or not to activate the internal Buzzer when the Alarm Input on

the corresponding camera is detected. Use the Enter or +/- (Mouse: Left click) to check/uncheck

this option. By default, this setting is checked.

• Log: This defines whether or not system events are logged. Click Enter or +/- to check/uncheck

this option. By default, this setting is checked.

• Screen Message: This option defines whether the event message appears on the screen or not.

Use the Enter button or +/- to check/uncheck this option. By default, this setting is checked.

• Notification: This option defines whether or not to send an event e-mail to a mobile device when

an Alarm Input is detected. If the mobile device has push notifications for the DVR enabled, an

e-mail will be sent to the predefined email addresses when the event is triggered. Press Enter or

+/- to check/uncheck this item. By default, this setting is checked.

• FTP: This option defines whether a file of a recorded event video/audio files is sent to an FTP

server. Use the Enter button or +/- to check/uncheck this option. By default, this setting is not

checked.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 85 86

Sin comentarios

Seagate ST200FP0021 Especificaciones Pagina 34