Seagate ST11200N Información técnica descargar pdf (Pagina 70)

Configuring Robotic Controls

Example 1: Built-in SCSI interface (sctl driver)

ioscan -f

Class I H/W Path Driver S/W State H/W Type Description

====================================================================

ext_bus 2 10/12/5 c700 CLAIMED INTERFACE Built-in SCSI

target 11 10/12/5.0 tgt CLAIMED DEVICE

tape 0 10/12/5.0.0 stape CLAIMED DEVICE HP C1533A

target 12 10/12/5.2 tgt CLAIMED DEVICE

disk 6 10/12/5.2.0 sdisk CLAIMED DEVICE TOSHIBA CD-ROM

In this case, the ext_bus entry specifies a c700 driver. You would configure the sctl

passthru driver for the SCSI robotic controls on this system (see “Configuring Device Files

for the sctl Passthru Driver” on page 56).

Example 2: 28655A SCSI Interface (spt driver)

ioscan -f

Class I H/W Path Driver S/W State H/W Type Description

================================================================

bc 0 root CLAIMED BUS_NEXUS

bc 1 56 bc CLAIMED BUS_NEXUS Bus Converter

ext_bus 0 56/52 scsi1 CLAIMED INTERFACE HP 28655A - SCSI

Interface

target 0 56/52.2 target CLAIMED DEVICE

tape 0 56/52.2.0 tape2 CLAIMED DEVICE HP HPC1533A

In this case, the ext_bus entry (which designates the bus adapter) specifies a scsi1

driver. You would configure the spt passthru driver for the SCSI robotic controls on this

system (see “Configuring Device Files for the spt Passthru Driver” on page 60).

Configuring Device Files for the sctl Passthru Driver

Use the following procedure to configure these types of device files. See “Determining

Which Passthru Driver to Configure” on page 55 to determine if you require these files.

Note You do not have to reconfigure the HP-UX kernel to use the sctl passthru driver

on HP9000-700 systems, since the generic SCSI driver is part of basic HP-UX.

56 NetBackup Media Manager Device Configuration Guide for UNIX, Windows, and Linux

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 112 113

Sin comentarios

Seagate ST11200N Información técnica Pagina 70