Seagate ST11200N Información técnica descargar pdf (Pagina 64)

Configuring Optical Disk Drives

3. Use the following command to change the device type (stored in the drive’s

nonvolatile memory) from optical memory to disk. The format of the command is as

follows, where ovpass_id is the logical identifier assigned to the device.

/usr/openv/volmgr/bin/scsi_command -d /dev/

ovpass_id

-disk

For example:

/usr/openv/volmgr/bin/scsi_command -d /dev/ovpass1 -disk

4. Remove the ovpass device files and the optical drive that were created by using

rmdev command as in the following:

rmdev -l

ovpass_id

-d

rmdev -l

optical_drive_id

-d

Where:

◆ ovpass_id is the logical identifier assigned to the device.

◆ optical_drive_id is the optical drive identifier assigned to the optical drive.

For example:

rmdev -l ovpass1 -d

rmdev -l omd0 -d

5. Reboot the system to allow the drive to be recognized as a disk drive by the kernel’s

SCSI disk driver during system initialization.

The optical drive should be displayed as: hdisklogical_number, where logical_number

is the logical number assigned to the drive by the system.

For example:

/usr/sbin/lsdev -C -s scsi

The following example output shows a disk drive, tape drive, robotic control, and

optical drive:

hdisk0 Available 00-00-0S-0,0 2.2 GB SCSI Disk Drive

rmt0 Available 00-00-0S-3,0 Other SCSI Tape Drive

ovpass0 Available 00-00-0S-2,0 VERITAS Media Changer

hdisk1 Available 00-00-0S-6,0 Other SCSI Disk Drive

50 NetBackup Media Manager Device Configuration Guide for UNIX, Windows, and Linux

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 112 113

Sin comentarios

Seagate ST11200N Información técnica Pagina 64