Seagate ST11200N Información técnica descargar pdf (Pagina 50)

Configuring Robotic Controls

The output shows that the device files exist for tape and disk, but not for the SCSI

robotic control at controller 1 (scsi0) and SCSI ID 5 (5,0).

hdisk0 Available 00-01-00-0,0 400 MB SCSI Disk Drive

rmt0 Available 00-01-00-3,0 Other SCSI Tape Drive

3. Create the device files by using the following command:

mkdev -c media_changer -t ovpass -s scsi -p scsi0 -w 5,0

4. Display the device files by issuing the following lsdev command:

/usr/sbin/lsdev -C -s scsi

hdisk0 Available 00-01-00-0,0 400 MB SCSI Disk Drive

hdisk1 Available 00-01-00-1,0 400 MB SCSI Disk Drive

rmt0 Available 00-01-00-3,0 Other SCSI Tape Drive

ovpass0 Available 00-01-5,0 VERITAS Media Changer

For this example use the following device file path to configure the SCSI robotic

control connected to controller 1 and SCSI ID 5:

/dev/ovpass0

Example 2

For this example, assume this robot is a LUN 1 controlled robot, rather than LUN 0. The

ovpass driver has been installed, but the device files for SCSI robotic control at controller

1 with SCSI ID 3 and logical unit number 1 do not exist.

1. Determine the logical identifier for the SCSI controller:

/usr/sbin/lsdev -C -c adapter | grep -i SCSI

The following output shows that scsi0 is the logical name for SCSI controller 1:

scsi0 Available 00-01 SCSI I/O Controller

2. Check if the device files exist for ovpass at SCSI ID 5.

/usr/sbin/lsdev -C -s scsi

The following output shows that the device files exist for tape and disk, but not for the

SCSI robotic control at controller 1 (scsi0), SCSI ID 3, and logical unit number 1 (3,1):

hdisk0 Available 00-01-00-0,0 400 MB SCSI Disk Drive

rmt0 Available 00-01-00-3,0 Other SCSI Tape Drive

3. The device files can now be created using the following command:

mkdev -c media_changer -t ovpass -s scsi -p scsi0 -w 3,1

36 NetBackup Media Manager Device Configuration Guide for UNIX, Windows, and Linux

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 112 113

Sin comentarios

Seagate ST11200N Información técnica Pagina 50