Seagate Medalist 1721 Guía de instalación Pagina 5

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 42
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 4
Medalist 1721, 1010, Rev. B 1
What you need
Straight-edge and Phillips screwdrivers
Four 6-32 UNC drive mounting screws
An ATA host adapter and interface cable (max length: 18
inches) with enough connectors for all your drives
An unused drive power cable for your new drive
A bootable DOS system diskette (Seagate recommends using
DOS Version 5.0 or later.)
If you are mounting this 3.5-inch drive in a 5.25-inch drive bay,
you need a mounting adapter or frame kit. Also, you may need
drive mounting rails if your drive bay is not designed for direct
mounting.
Before you begin
Make sure your computer is turned off before you open the
case.
Read the handling precautions following and inspect the drive
to make sure that it is not damaged.
Save your foam-lined Seagate
disc drive box. Seagate has
approved this box for shipping a Seagate disc drive. Using any
other container or packing material voids your drive warranty.
Vista de pagina 4
1 2 3 4 5 6 7 8 9 10 ... 41 42

Comentarios a estos manuales

Sin comentarios