Seagate HAWK 2 ST12400W/WD/WC Guía de instalación Pagina 19

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 40
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 18
Hawk 2 (Wide bus) Family Install Guide, Rev. C 17
Notes.
[1] Standard units are factory formatted with 512 data
bytes per sector. ST12400 OEM standard models
have twelve spare sectors per cylinder and 2
cylinders at inner tracks reserved for spares. The
model ST11900 has six spares per cylinder and 2
spare cylinder per unit.
[2] Does not Include on-board controller overhead.
[3] Maximum measured at any location on top cover.
[4] For best reliability keep below 35
o
C (95
o
F).
[5] A droop of up to -10% is permissible for a maximum
of 10 seconds at power up. (abfall von -10% ist
erluabt für 10 Sekunden max).
[6] Measured with an average reading DC ammeter.
Instantaneous +12 V current peaks will exceed
these values.
[7] Can be commanded to operate according to SCSI-
1 protocol.
Vista de pagina 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Comentarios a estos manuales

Sin comentarios