Seagate HAWK 2 ST12400W/WD/WC Guía de instalación descargar pdf (Pagina 11)

Hawk 2 (Wide bus) Family Install Guide, Rev. C

• Low-level formatting: After the drive has been

properly configured for the system, it does not need

to be low-level formatted, as this has been done by

the factory and does not require this step during

installation. (The low-level format writes the sector

boundaries and track information to the drive). Defect

management information is read from the drive by the

host system when required in the installation proce-

dure. If an installed drive is low-level formatted, all

user data stored on the drive will be lost.

Note. Seagate Technology assumes no liability for

lost user data.

• Partitioning and high level formatting: A drive can

be sub-divided into "partitions" which behave as

individual drives within the system. See your system

documentation. Present day drive installation pro-

grams have menus that lead you through these

installation procedures.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Sin comentarios

Seagate HAWK 2 ST12400W/WD/WC Guía de instalación Pagina 11