Seagate ST3300007LW Guía de usuario descargar pdf (Pagina 65)

The Settings Tab

Figure 36 - The Settings Tab

The ‘Settings’ tab provides the ability to change

default settings for SCSI Hammer™ actions.

Changes made here are saved on the device in

NVRAM.

SCSI Hammer™ Notes:

Any SCSI Bus ID conflict, including setting

SCSI Hammer™ to the same SCSI ID as a

drive attached to either ‘Side’ of the

device, will result in unexpected behavior.

One known behavioral characteristic is that

the LCD will show devices connected at

*every* SCSI ID, even if not all IDs are

occupied.

To restore factory default settings, use the

‘Restore Defaults’ button. Figure 36 depicts the

Settings Tab showing default values. These are:

• Bang

o This indicates the method of

erasure. Users may select 'Security

Erase' using the drop-down menu

• Verify Command

o [Disabled by default]

• Print Labels

o Optional Bluetooth printer required. [Disabled by default]

• Clear HPA

o [Enabled by default]

• PowerOn Timeout (ms)

o Default Value: [20,000]

• Command Timeout (ms)

o Default Value: [4,000]

• Bluetooth Timeout (ms)

o Default Value: [50,000]

• FPGA Retry Count

o Default Value: [3]

• Bus ID Number

o Default Value: [7]

SCSI Hammer™ Users Guide

Page 65 of 89

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 88 89

Sin comentarios

Seagate ST3300007LW Guía de usuario Pagina 65