Seagate ST3655N Manual de usuario descargar pdf (Pagina 202)

SANtools® S.M.A.R.T. Disk Monitor (SMARTMon-UX)196

PSU(1) type (alphanumeric)

(NEWISYS) NDS2240

Max expander speed (alphanumeric)

Tray Descriptor (alphanumeric)

Backplane FRU P/N (alphanumeric)

System serial number (alphanumeric)

FRU vendor (alphanumeric)

FRU manufacture date (date)

FRU type (alphanumeric)

ESM P/N (alphanumeric)

ESM serial number (alphanumeric)

ESM vendor (alphanumeric)

ESM manufacture date (date)

ESM type (alphanumeric)

PSU(0) P/N (alphanumeric)

PSU(0) serial number (alphanumeric)

PSU(0) vendor (alphanumeric)

PSU(0) manufacture date (date)

PSU(0) type (alphanumeric)

PSU(1) P/N (alphanumeric)

PSU(1) serial number (alphanumeric)

PSU(1) vendor (alphanumeric)

PSU(1) manufacture date (date)

PSU(1) type (alphanumeric)

Total Vendor-specific log page records: 1707

Total Vendor-specific inq page records: 203

Total ANSI-defined log page records: 55

Total TapeAlert messages: 52

If your device does not appear above, remember that there are still dozens of other ANSI-standard fields that will be

reported. Please feel free to contact us, so that we may work with your device's manufacturer in order to obtain the

necessary programming information required to add vendor-unique reporting for it.

1.50 Write Cache Enable

The -wce command was added to facilitate one of the most common mode page changes. This enables the write

cache on the disk drive. (The command is generally not applicable to anything but disk drives. However, you could

theoretically have a device that is not a disk drive that uses a write cache). Conversely, use the -wcd command to

disable the write cache.

(The write cache bit is located on mode page #8, byte #2, bit #2. If that bit is set, the cache is enabled. Note that only

one byte is different in the commands below.

Example(s)

[root@BOSS etc]# ./smartmon-ux -wce /dev/sg2

Discovered SEAGATE ST373307LC S/N "3HZ03822" on /dev/sg2 (SMART enabled)(70007 MB)

Sending command: -B S,08,12,14,00,FF,FF,00,00,FF,FF,FF,FF,00,20,00,00,00,00,00,00

Result: (SUCCESS) - The write cache is now enabled

Program Ended.

[root@BOSS etc]# ./smartmon-ux -wcd /dev/sg2

Discovered SEAGATE ST373307LC S/N "3HZ03822" on /dev/sg2 (SMART enabled)(70007 MB)

Sending command: -B S,08,12,10,00,FF,FF,00,00,FF,FF,FF,FF,00,20,00,00,00,00,00,00

Result: (SUCCESS) - The write cache is now disabled

Program Ended.

[root@BOSS etc]# ./smartmon-ux -wcd /dev/sg2

1 2 ... 197 198 199 200 201 202 203 204 205 206 207 ... 262 263

Comentarios a estos manuales

Sin comentarios

Seagate ST3655N Manual de usuario Pagina 202

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Seagate ST3655N