Seagate ST2500418AS Manual de usuario descargar pdf (Pagina 42)

DVR User’s Manual

4.5.2 Dome Protocol Setup

The Dome Protocol lists the supported dome protocols for communicating

with dome cameras connected to the DVR. From the Main menu, select

<Camera> and press ENTER. To configure dome protocol, select a camera

first and set the communication protocol associated with dome camera using

the Direction keys and ENTER.

Analog Camera

Analog Camera Select

Dome Protocol

Dome ID

Camera Title

Covert

Termination

Brightness

Contrast

Saturation

Hue

Audio Association

Copy Settings

CH01

None

Ch1

Yes

NOTE: The settings become effective after saving the changes and

exiting from the menu.

4.5.3 RS485 Setup

The DVR controls the dome cameras via RS-485 communication protocol.

The RS-485 parameters of the DVR must be set to the same as the

parameters set in dome camera.

Users are allowed to change the RS-485 settings of the DVR. Select

<System> in Main menu, then select <RS485 Setup> from the System setup

menu and press ENTER. The following menu is displayed.

RS485 Setup

Unit ID

Baud Rate

Bits

Stop

Parity

224

9600

None

Unit ID number must match the ID address set by the dome camera. The Unit

ID is in the range of 1 to 255. Note that there cannot be any two devices on

the same bus given the same ID address, or a conflict may occur.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 67 68

Comentarios a estos manuales

Sin comentarios

Seagate ST2500418AS Manual de usuario Pagina 42

Comentarios a estos manuales

Relacionado con productos y manuales para Grabadores de vídeo digital (dvr) Seagate ST2500418AS