Seagate ST2500418AS Manual de usuario descargar pdf (Pagina 15)

DVR User’s Manual

JOG / SHUTTLE (for specified models)

The jog/shuttle knob, shown as the figure on

the right, is a combination of a shuttle ring with

an embedded jog disk. It provides wide latitude

in playback control. Note that the jog/shuttle

knob is active only when the DVR is in

Playback mode.

Please refer to Appendix F: Jog / Shuttle

Control for further information.

3.2 Enter OSD Setup Menu

The configuration of the DVR can be customized through the intuitive

Graphical User Interface (GUI) OSD setup menu. Collaborating with a USB

mouse, setting up the DVR can be easy as operating on a PC. Press MENU

and select an account to login.

The next step is to enter a corresponding password. The preset password for

the administrator account “admin” is “1234”.

NOTE: It is strongly suggested to change the preset password to

prevent unauthorized access to the unit.

An icon displayed at the status bar will show the authority level of the account.

Under logout condition, the icon will be a guest icon. When an account is

logged in, its authority level number (1~8) will be shown.

Before completely logJLQJout, other functions can also be accessed

withouthaving to login again. There are two ways to logout: manually

logout bypressing ESC key at Live mode, or auto logout when keys are not

pressed for 5 minutes at Live/ Menu mode.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 67 68

Sin comentarios

Seagate ST2500418AS Manual de usuario Pagina 15