Seagate Maxtor BlackArmor Windows only Información técnica descargar pdf (Pagina 124)

• SATA controllers usually appear under the SCSI and RAID controllers section of

Device Manager, while hard drives are listed under the Disk drives section.

• The SATA controller and SATA hard drive must not be displayed in the Device

Manager with a yellow exclamation mark or any other error indication.

8. After you have installed the hard disk in your computer and have configured it in

BIOS, one can say that the PC "knows" about its existence and its main parameters.

However, it is still not enough for the operating system to work with the hard disk.

In addition, you have to create partitions on the new disk and format the partitions

using Seagate BlackArmor Backup. See

Chapter 14. Adding a new hard disk

. Then

configure your BIOS to boot from the SATA controller and boot from the SATA hard

drive to ensure it works.

1 2 ... 119 120 121 122 123 124 125 126 127 128

Sin comentarios

Seagate Maxtor BlackArmor Windows only Información técnica Pagina 124